banenr

product

  • GTY-AEC2335b AC220V Powered Point-type Combustible Gas Detector

    GTY-AEC2335b AC220V Powered Point-type Combustible Gas Detector

    AEC220V power supply

    Alarming mode

    Real-time concentration detection

    LED display

    Sensor can be hot swapped and replaced

    Welcome to click the Inquiry button to obtain the free samples!

  • GT-AEC2232bX-p Fixed Gas Detector

    GT-AEC2232bX-p Fixed Gas Detector

    Patented compound PID joint detection technology

    In order to improve the life of the PID sensor, an innovative mode of dual-sensor joint operation is adopted. The semiconductor detection signal is used as the starting signal of the PID detector to reduce the working time of the PID sensor, so the service life of the PID sensor can be greatly improved (2-5 years);

    Patented rainproof and dustproof technology

    The new multi-purpose rainproof and dustproof cover gives consideration to rain and dust prevention. It can effectively filter 99% impurities and reduce the blocking probability of pumping device;

  • AEC2323 Explosion-proof Audible-visual Alarm

    AEC2323 Explosion-proof Audible-visual Alarm

    The AEC2323 explosion-proof audible-visual alarm is a small audible-visual alarm applicable to zone-1 and 2 hazardous areas and class-IIA, IIB, IIC explosive gas environment with a temperature class of T1-T6.

    The product has a stainless steel enclosure and a red PC lampshade. It is characterized by high intensity, impact resistantance, and high explosion-proof grade. Its LED luminescent tube is characterized by highlight, long service life and non-maintenance. With a G3/4’’ pipe thread (male) electrical interface design, it is easier to be connected to other devices to give audible-visual alarms at dangerous sites.

    Welcome to click the Inquiry button to obtain the free samples!

  • AEC2232bX Series Toxic & Combustible Gas Detector

    AEC2232bX Series Toxic & Combustible Gas Detector

    This series of detectors adopts integrated functional module design, which is convenient for on-site hot swapping and replacement. It can be equipped with various types of sensors, such as catalytic sensor, semiconductor sensor, electrochemical sensor, infrared (IR) sensor, photoion (PID) sensor, etc. and can detect various toxic and combustible gas concentrations (ppm /% LEL /% VOL) on site. The detector has the characteristics of flexible combination, quick and easy replacement, stable performance, good consistency, high sensitivity, low power consumption, multiple outputs and optional detection methods. It is widely used in petroleum, chemical industry, pharmacy, steel, special industrial plants and other places with combustible or toxic and harmful gases.

    Welcome to click the Inquiry button to obtain the free samples!

  • DT-AEC2531 Combustible Gas Monitoring Device for Underground Well Room

    DT-AEC2531 Combustible Gas Monitoring Device for Underground Well Room

    In the process of using natural gas, various equipment and devices such as pipelines, gate stations, pressure regulating equipment, valve wells, etc. are involved. These complicated gas supply equipment and pipe networks have brought many problems to the management of gas companies, especially the management of gas valve wells. Gas valve wells can cause gas leakage due to equipment aging, faults, and improper operation of personnel. However, traditional manual inspections are difficult to rush to the site for effective treatment in the first time due to the inspection density and inspection effect. All these have brought challenges to the management of gas companies.

  • GT-AEC2331a Industrial and commercial combustible gas detector

    GT-AEC2331a Industrial and commercial combustible gas detector

    High intelligence and digitalization

    High-performance micro-controller technology, automatic failure identification and automatic alarm, high-concentration gas over limit protection;

    Only one ESN. No code dialing is required, reducing the complexity of manual code dialing;

    Sensitivity curve attenuation compensation

    Advanced embedded software treatment technology, automatic service life attenuation compensation and high sensitivity;

  • GTY-AEC2335 AC220V Powered Fixed Gas Detector

    GTY-AEC2335 AC220V Powered Fixed Gas Detector

    AEC220V power supply

    This detector works while it is electrified (220V). The comprehensive cost is low. It has functions of controller + detector, as an independent system;

    Alarming mode

    Audible-visual alarm: buzzer alarming and indicator alarming;

    Real-time concentration detection

    Monitor combustible gases within the lower explosive limit in the industrial environment and give alarms;

    Welcome to click the Inquiry button to obtain the free samples!

  • GT-AEC2338 Fixed Gas Detector

    GT-AEC2338 Fixed Gas Detector

    Highly-integrated functional module design

    The integrated functional module is made up of two parts, i.e. detector module and sensor module. Anti-misplug standard digital interface is used between the two modules, good for on-site hot plug replacement;

    Alarm concentration can be set freely within the full range

    Low alarm concentration and high alarm concentration can be set freely within the full range. As keys are used for calibration, the calibrated value can be set according to calibrated gas concentration. Concentration is displayed through LCD on a real-time basis. On-site calibration can also be perfomed with an IR remote controller. At the time of calibration, it is unnecessary to open the cover. The operation is easy and convenient;

    Welcome to click the Inquiry button to obtain the free samples!

  • GT-AEC2232a Series Fixed Gas Detector CH4 CO H2S Gas Detector

    GT-AEC2232a Series Fixed Gas Detector CH4 CO H2S Gas Detector

    GT-AEC2232 Series detector adopts integrated functional module design, including two parts: detector module and sensor module. The two modules adopt anti-misplug standard digital interface, which is convenient for on-site hot swapping and replacement. The detector has a high-brightness LED real-time concentration display, and the infrared remote control can be used for calibration on site. There is no need to open the cover during calibration, and the operation is simple and convenient. It is widely used in small and medium-sized enterprises, municipal and urban gas.

  • GT-AEC2232a Series Fixed Gas Detector

    GT-AEC2232a Series Fixed Gas Detector

    GT-AEC2232 Series detector adopts integrated functional module design, including two parts: detector module and sensor module. The two modules adopt anti-misplug standard digital interface, which is convenient for on-site hot swapping and replacement. The detector has a high-brightness LED real-time concentration display, and the infrared remote control can be used for calibration on site. There is no need to open the cover during calibration, and the operation is simple and convenient. It is widely used in small and medium-sized enterprises, municipal and urban gas.