China Gas Monitoring Device GT-AEC2338 Fixed Gas Detector – Action manufacturers and suppliers

Gas Monitoring Device GT-AEC2338 Fixed Gas Detector – Action

Short Description:

ACTION gas detectors are OEM & ODM supported and true mature devices, long-tested in millions of projects domestic and overseas since 1998! Don't hesitant to leave your any inquiry here!

Send email to us

Product Detail

Product Tags

Feedback (2)

To be able to give you benefit and enlarge our business, we also have inspectors in QC Team and assure you our greatest service and products for Gas Leakage Monitoring System, Ch4 Gas Detector, Natural Gas Alarms, We sincerely welcome all guests to set up business relationships with us on the basis of mutual benefits. Please contact us now. You will get our professional reply within 8 hours.

Gas Monitoring Device GT-AEC2338 Fixed Gas Detector – Action Detail:

Technical Parameters

Item	Data
Detected gases	Combustible gases and steams, toxic and hazardous gases (see A01, A03 and B04~B29 in the list of detectable gases)
Sampling mode	Diffusive sampling
Operating voltage	DC24±6V
Power consumption	≤3W (DC24V)
Display	LCD display
Calibration	By keys or a remote controller
Signal transmission distance	≤1500m (2.5 mm²)
Protection grade	IP66
Explosion proof grade	ExdⅡCT6Gb
Signal transmission	Three-wire (4~20)mA standard signals [support HART] and 3 sets of relay signals
Outlet hole connecting thread	NPT3/4＂(female)
Material	Cast aluminum
Dimension	Length × width × height: 228mm×177mm×87mm
Weight	1.9 kg

Major Features

Highly-integrated functional module design

The integrated functional module is made up of two parts, i.e. detector module and sensor module. Anti-misplug standard digital interface is used between the two modules, good for on-site hot plug replacement;

Alarm concentration can be set freely within the full range

Low alarm concentration and high alarm concentration can be set freely within the full range. As keys are used for calibration, the calibrated value can be set according to calibrated gas concentration. Concentration is displayed through LCD on a real-time basis. On-site calibration can also be perfomed with an IR remote controller. At the time of calibration, it is unnecessary to open the cover. The operation is easy and convenient;

Military-grade LCD display

LCD real-time concentration display, clearly indicating equipment working conditions under highlight and in distance;

Multiple communication modes are available

Such product types as three-wire (4-20mA), two-wire (4-20mA), and 4-20mA with HART are available for selection;

Flexible combination and multiple output modes

Multiple detector modules and multiple types of sensor modules can be combined flexibly to form detectors with special output functions and applicable to different targets to meet customers’ customized demands;

Replace a sensor as easy as replacing a bulb

Sensor modules for different gases and ranges can be replaced freely. No calibration is required after replacement. That is, the detector can read ex-factory calibrated data and work immediately. In this way, the product has a longer service life. Meanwhile, detection calibration can be done easily at different sites, avoiding complicated dismantling process and difficult on-site calibration and reducing later maintenance cost.

Model Selection

Model

Signal output

Sensor equipped

Adaptive control system

AEC2338

Three-wire (4~20)mA standard signal (supporting HART) and three sets of relay signals

Two-wire (4~20)mA standard signal (supporting HART)

Catalytic combustion, semiconductor, electrochemical, IR & PID

ACTION gas alarm controllers:

AEC2392a, AEC2392b, AEC2393a , AEC2393b2a-BS, AEC2393b2a-BM

Detector Structure

Boundary Dimension

Material cast aluminum; Dimension: Length× width× height: 228mm×177mm×87mm Weight: 1.9 kg

Mounting Mode

Vertical pipe-mounted / Horizontal pipe-mounted / Wall-mounted / Ceiling-mounted

Product detail pictures:

Related Product Guide:

Our organization promises all customers with the first-class products and solutions and the most satisfying post-sale service. We warmly welcome our regular and new clients to join us for Gas Monitoring Device GT-AEC2338 Fixed Gas Detector – Action , The product will supply to all over the world, such as: India, Madagascar, Guatemala, Look forward to the future, we will focus more on the brand building and promotion . And in the process of our brand global strategic layout we welcome more and more partners join us, work together with us based on mutual benefit. Let's develop market by fully utilizing our comprehensive advantages and strive for building.

High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.