product

Technical specifications

Product Parameter Characteristics

Major Features

● AEC220V power supply

This detector works while it is electrified (220V). The comprehensive cost is low. It has functions of controller + detector, as an independent system;

● Alarming mode

Audible-visual alarm: buzzer alarming and indicator alarming;

● Real-time concentration detection

Monitor combustible gases within the lower explosive limit in the industrial environment and give alarms;

● Linked output

Multiple output modes are available. The detector can link solenoid valves and fans, etc;

● Wireless transmission

GPRS communication modules are optional, used to send data to MSSP wirelessly. User can monitor equipment running statuses through a fixed terminal or a mobile terminal APP;

● High sensitivity

Automatic zero correction (to avoid zero wander that may cause a measurement error), automatic curve compensation, intelligent temperature and zero compensation algorithm (for better performance), low power consumption, two-point calibration, curve-fitting technique, high accuracy, stable performance and reliable sensitivity;

● IR remote control

An IR remote controller is used to set parameters;

● Application sites

Mini-sized industrial and commercial gas application sites in the urban fuel gas field.

Model Selection

Model Selection

1. Top cover component

2. Plastic supporting cover

3. Circuit board -1

4. Grounding screw

5. Bottom box

6. Outer cover of the gas collecting head

7. Gas collecting head

8. Circuit board -2

9. Nameplate

10. Horn component

11. Switching button

12. Mounting screw

13. Mounting hook

14. Seal ring

Boundary Dimension

Dimension: Length× width× height: 217mm×188mm×75.5mm

Mounting Mode

The detector should be wall-mounted. Please ensure that the detector is mounted firmly and reliably. The wall mounting mode is shown as below: