Call Support 24/7
+86-28-68724242
product
Gas Detector And Valve GT-AEC2331a Industrial and commercial combustible gas detector – Action
Gas Detector And Valve GT-AEC2331a Industrial and commercial combustible gas detector – Action Detail:
Technical Parameters
|
Item |
Data |
|
Detected gases |
Natural gas |
|
Principle of detection |
Catalytic combustion |
|
Sampling mode |
Diffusive sampling |
|
Range |
3-100%LEL |
|
Operating voltage |
DC24±6V |
|
Power consumption |
≤1W (DC24V) |
|
Electrical interface |
NPT3/4＂ |
|
Protection grade |
IP66 |
|
Explosion proof grade |
ExdⅡCT6Gb |
|
Shell |
Cast aluminum |
|
Dimension |
Length × width × thickness: 110mm×103mm×55mm |
|
Weight |
About 530g |
Major Features
High intelligence and digitalization
High-performance micro-controller technology, automatic failure identification and automatic alarm, high-concentration gas over limit protection;
Only one ESN. No code dialing is required, reducing the complexity of manual code dialing;
Sensitivity curve attenuation compensation
Advanced embedded software treatment technology, automatic service life attenuation compensation and high sensitivity;
Real-time concentration detection
Real-time gas concentration detection; concentration information is transmitted to an adaptive controller;
Portable and small size, easy to mount
The product is portable and small in size, applicable to diversified mounting modes and easy to mount.
Model Selection
|
Model |
Signal output |
Sensor equipped |
Adaptive control system |
|
GT- AEC2331a |
Four-bus communication (S1, S2, GND and +24V) |
Catalytic combustion |
ACTION gas alarm controllers: AEC2301a, AEC2302a, AEC2303a and AEC2305 |
Detector Structure
1. Install bottom board
2. Bottom box
3. Explosion-proof single-sealed cable gland
4. M4 x10 Hexagon socket head cap screw
5. Sensor cover
6. Light guide
7. Top cover
Detector Structure
A. Holding pipe-mounted (Holding pipe diameter DN20)
B. Vertical pipe-mounted (Holding pipe diameter DN20)
C. Wall-mounted
D. Ceiling-mounted
Product detail pictures:
Related Product Guide:
abide by the contract", conforms on the market requirement, joins from the market competition by its good quality likewise as provides more comprehensive and superb support for customers to let them become large winner. The pursue of the company, is definitely the clients' pleasure for Gas Detector And Valve GT-AEC2331a Industrial and commercial combustible gas detector – Action , The product will supply to all over the world, such as: Cairo, Croatia, Niger, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Marcy Real from Holland - 2018.11.02 11:11
This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
By Deirdre from Morocco - 2018.06.21 17:11
-
Factory made hot-sale Gas Detector 4 In 1 - AE...
-
Gas Detectors DT-AEC2531 Combustible Gas Monito...
-
Personal Gas Detector GT-AEC2232a Series Fixed...
-
Methane Gas Monitor GT-AEC2232bX-p Fixed Gas D...
-
Gas Leak Detector With Selanoid Valve GT-AEC23...
-
Gas Monitoring Systems GT-AEC2232a Series Fixe...
