+86-28-68724242

Products

Contact us

AEC2335 Point-type Combustible Gas Detector(AC220V Power Supply)

Detectable gases:Natural gases
Gas sampling:Diffusion sampling
Range:(0~100) %LEL
Response Time:≤30S
Alarming Mode:Buzzer alarming and indicator alarming

+86-28-68724242

Technical Specifications

Name

Parameter
Detectable Gases Natural gases
Sampling Mode Diffusive sampling
Range (0~100) %LEL
Response Time ≤30S
Operating Voltage AC176V~AC264V (50Hz±1%)
Alarming Mode Buzzer alarming and indicator alarming
Outlet hole connecting thread NPT3/4"(female)
Explosion Proof Grade Exd II CT6 Gb Protection grade: IP66
Service life of the sensor Three years (typical)

 

 

Major Features

    1.jpg AEC220V power supply 

    This detector works while it is electrified (220V). The comprehensive cost is low. It has functions of controller + detector, as an independent system;

    1.jpg Alarming mode 

    Audible-visual alarm: buzzer alarming and indicator alarming;

    1.jpg Real-time concentration detection

    Monitor combustible gases within the lower explosive limit in the industrial environment and give alarms;

    1.jpg Linked output 

    Multiple output modes are available. The detector can link solenoid valves and fans, etc.;

    1.jpg Wireless transmission 

    GPRS communication modules are optional, used to send data to DRMP wirelessly. User can monitor equipment running statuses through a fixed terminal or a mobile terminal APP;

    1.jpg High sensitivity

    Automatic zero correction (to avoid zero wander that may cause a measurement error), automatic curve compensation, intelligent temperature and zero compensation algorithm (for better performance), low power consumption, two-point calibration, curve-fitting technique, high accuracy, stable performance and reliable sensitivity;

    1.jpg IR remote control 

    An IR remote controller is used to set parameters;

    1.jpg Application sites 

    Mini-sized industrial and commercial gas application sites in the urban fuel gas field.

     
     

     

Product Architecture

1. Top cover component 

2. Plastic supporting cover

3. Circuit board -1

4. Grounding screw

5. Bottom box

6. Outer cover of the gas collecting head 

7. Gas collecting head

8. Circuit board -2

9. Nameplate 

10. Horn component 

11. Switching button

12. Mounting screw 

13. Mounting hook

14. Seal ring 


2335.png




Inquiry

Please feel free to give your inquiry in the form below.

We will reply you in 24 hours.

*Name

*Country

*Email

*Tel

*Company

*Inquiry

 

Recommend

COPYRIGHT©Copyright: Chengdu Anken Electronics Co., Ltd. 蜀ICP备18021820号-1